School Hall Floor – Video’s

School Floor Sanding.  178 sqm of Hardwood Herringbone Block Flooring, Restored by Floorcare Services (Time Lapse video 58).  This was a bad one! Years and Years of low quality polish had been applied to the floor to the point where you couldn’t see the outline of the blocks.  The block floor was sanded at a Primary School in Nottingham, Nottinghamshire. It was sanded back to bare wood and Sealed with 3 coats of ‘Floortech Products – New Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal. We sanded the floor removing the previous Polish / finish / seal / varnish, wear marks, scratches, and damage was repaired via filling. This School Hall Floor was refurbished in a total of 5 days only.

School Floor Sanding.  182 sqm of Hardwood Herringbone Block Flooring, Refurbished by Floorcare Services (Time Lapse video 60).  This was a bad one, PART 2! Years and Years of low quality polish had been applied to the floor to the point where you couldn’t see the outline of the blocks.  A large section of the floor had vinyl glued to it also.  The block floor was sanded at a Primary School in Nottingham, Nottinghamshire. It was sanded back to bare wood and Sealed with 3 coats of ‘Floortech Products – New Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal. We sanded the floor removing the previous Polish / finish / seal / varnish, wear marks, scratches, and damage was repaired via filling. This School Hall Floor was refurbished in a total of 5 days only.

118 sqm of Hardwood Herringbone Bock school Floor Sanding & Varnishing by Floorcare Services (Time Lapse video 48). This hardwood block floor was sanded at Frieth, Henley on Thames. It was sanded back to bare wood removing all previous finish, marks, scratches, etc. Then Sealed with 3 coats of ‘Floortech Products’ – ‘Aquaguard’ a water based 2 component ( 2 pack ) polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play Gloss finish. Aquaguard seal is design for areas exposed to extreme wear. This School Hall floor was Sanded and Sealed with 3 coats in just 3 days.

164 sqm of Maple School Hall Floor Sanding & Sealing by Floorcare Services (Time Lapse video 43). This Hardwood floor was sanded at Willows Primary School. It was sanded back to bare wood and Sealed with ‘Floortech Products – Acryseal’ primer coat, followed by 2 coats of two component (2 pack) water based commercial grade ‘Floortech Products – Aquaguard’ polyurethane floor seal, Gloss finish was applied conforming to EN BS 14904 Slip resistance for indoor sports play. We sanding the floor we removed all previous finish, marks, scratches etc. We filled any holes / damage in the floor using wood gained from sanding mixed with filler resin before applying the 3 coats of commercial seal. This School Hall Floor was Sanded and Sealed in Lichfield, Staffordshire

156 sqm of Maple Hardwood Strip School Flooring, Sand & Seal by Floorcare Services (Time Lapse video 41). This Hardwood Maple floor was sanded at Landau Forte sixth form Academy, Tamworth, Staffordshire. It was sanded back to bare wood and Sealed with 3 coats of ‘Floortech Products – Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play. We sanded the floor we removed all previous finish / seal / varnish, wear marks, scratches etc. The floor was just as a Gymnasium with machines and weighs used on it, so 3 coats of the commercial grade seal were used for extra durability. This School floor took just 3 days to complete.

139 sqm of Composite Block School Hall Floor, Sanding & Finishing by Floorcare Services (Time Lapse video 34). This Composition Block (Granwood) floor was sanded at Low Road Primary School. It was sanded back to bare wood and Sealed with 3 coats of ‘Floortech Products – Sportguard’ a solvent based moisture cured polyurethane commercial grade floor seal conforming to EN BS 14904 Slip resistance for indoor sports play. We sanding the floor we removed all previous finish / seal / varnish, wear marks, scratches etc. Any holes / damage in the floor was filled using wood gained from sanding mixed with filler resin before applying the 3 coats of the commercial grade seal. This School Hall Floor was Sanded and Sealed in Hunslet, Leeds.

A 160 sqm Maple Hardwood Block School Hall Floor Sand & Seal (Time Lapse video 1). It took just 6 hours 47 minutes to sand this Herringbone block floor back to bare wood, removing all previous finish, marks, scratches etc. We then applied a commercial grade, Water based polyurethane coating, conforming to BS EN 14904. The second and third coats were applied the following day.

Tel: 01773 822 198    Mobile: 07971 166904    Emailinfo@floorcareservices.co.uk

(All Answer phone messages, Emails and Text messages will be replied to within 24 hours and Calls answered 7 days a week.)