Domestic Floor Sanding & Sealing – Video’s

Oak Hardwood Strip Floor Sanding.  27 sqm of pre finished Oak Floor Sanding & Refinishing by Floorcare Services (Time Lapse Video 57). This Hardwood strip floor was refurbished at Belper, Derbyshire.  It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from ‘Floortech Products – Pre-Seal’, followed by 2 coatings of ‘Floortech Products – Waterthane Super 100’, a water based commercial grade polyurethane floor seal, Satin finish.  This residential / Domestic Floor was Sanded and Sealed with 2 coats in 1 day, and just 1 hour on day 2 to apply the final coat and complete.

Pine Herringbone Block Floor Sanding.  37 sqm of Softwood Herringbone Block Floor Sanding & Refinishing by Floorcare Services (Time Lapse Video 55). This Softwood block floor was refurbished at Mackworth, Derbyshire. We replaced 35 to 45 damaged blocks.  It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from ‘Floortech Products – Pre-Seal’, followed by 2 coatings of ‘Floortech Products – Waterthane’, a water based commercial grade polyurethane floor seal, Satin finish.  This residential / Domestic Floor was Sanded and Sealed with 2 coats in 1 day, and just 1 hour on day 2 to apply the final coat and complete.

25 sqm of Maple Engineered Hardwood Strip Flooring Sanded & finishing by Floorcare Services (Time Lapse video 52). This hardwood floor was restored at Belper, Derbyshire. It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from Floortech Products – ‘Pre-Seal’, followed by 2 coatings of Floortech Products – ‘Waterthane Super 100’, a Water Based commercial grade polyurethane floor seal / varnish, Satin finish. This Residential / Domestic Floor was Sanded and Sealed with 2 coats in 1 day, and took just 1 hour on day 2 to apply the final coat and complete.

23 sqm of Hardwood Oak Strip Floor Sanding & re finishing by Floorcare Services (Time Lapse video 47). This hardwood oak floor was sanded at Ashbourne, Derbyshire. It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from Floortech Products – ‘Pre-Seal’, followed by 2 coatings of Floortech Products – ‘Waterthane Super 100’, a water based commercial grade polyurethane floor seal, Satin finish. This residential / Domestic Floor was Sanded and Sealed with 2 coats in just 6 hours, and just 1 hour on day 2 to apply the final coat and complete.

25 sqm of Herringbone Hardwood Block Floor Restoration by Floorcare Services (Time Lapse video 46). This hardwood block floor was sanded at Aldwark Matlock, Derbyshire. It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from Floortech Products – ‘Pre-Seal’, followed by 2 coatings of Floortech Products – Waterthane Super 100, a water based commercial grade polyurethane floor seal, Satin finish. This residential / Domestic Floor was Sanded and Sealed with 2 coats in 5 hours, and just 1 hour on day 2 to apply the final coat and complete.

35 sqm of Hardwood Herringbone Block Floor Sanding & Varnishing by Floorcare Services (Time Lapse video 49). This hardwood block floor was restored at Matlock, Derbyshire. It was sanded back to bare wood removing all previous finish, marks, scratches, paint drips etc. Then treated with coat 1, a barrier seal from Floortech Products – ‘Pre-Seal’, followed by 2 coatings of Floortech Products – ‘Waterthane Super 100’, a water based commercial grade polyurethane floor seal, Satin finish. This residential / Domestic Floor was Sanded and Sealed with 2 coats in 1 day, and just 1 hour on day 2 to apply the final coat and complete.

14 sqm of Oak Block Hallway Flooring, Sanded & Sealed (Time Lapse video 28). This hardwood floor was sanded back to bare wood, removing all previous finish, marks, scratches etc. We filled any holes around the floor from grippers, damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. This took 5 hours to complete on day 1. The final coat was applied the following day, which only took 1 hour.  This Floor was Sanded and Sealed in Kilburn, Derbyshire.

8 sqm of Pitch Pine Strip flooring, Sanded & Sealed (Time Lapse video 23). This bathroom floor was in a cottage that couldn’t be accessed with our big sander, so the whole floor was sanded using an edging sander only. The Softwood floor needed to be sanded back to bare wood, removing all previous finish, sanding marks, scratches etc. We filled any holes around the floor from damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat was applied the following day.  This Floor was Sanded and Sealed in Holbrook, Derbyshire.

38 sqm of Pine Strip flooring, Sanded & Sealed (Time Lapse video 22). The floor had been sanded previously by the owner quite badly with sanding marks all over the surface. The Softwood floor needed to be sanded back to bare wood, removing all previous finish, sanding marks, scratches etc. We filled any holes around the floor from damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat was applied the following day.  This Floor was Sanded and Sealed in Pentrich, Derbyshire.

15 sqm of Oak block flooring, Sanded & Sealed (Time Lapse video 21). This is the Dining room from a 3 room sanding job, 40sqm total. This hardwood floor was sanded back to bare wood, removing all previous finish, marks, scratches etc. We filled any holes around the floor from grippers, damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat was applied the following day.  This Floor was Sanded and Sealed in Kirk Langley, Derbyshire.

18 sqm of Oak block flooring, Sanded & Sealed (Time Lapse video 19). This is the living room from a 3 room sanding job, 40sqm total. This hardwood floor was sanded back to bare wood, removing all previous finish, marks, scratches etc. We filled any holes around the floor from grippers, damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat was applied the following day.  This Floor was Sanded and Sealed in Kirk Langley, Derbyshire.

10 sqm of Oak 165mm wide strip flooring, Sanded & Sealed (Time Lapse video 18). It took just 2 hours to sand this hardwood floor back to bare wood, removing all previous finish, marks, scratches etc. We Filled any holes around the floor from grippers, damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat was applied the following day.  This Floor was Sanded and Sealed in Kirk Langley, Derbyshire.

18 sqm of Hardwood herringbone block flooring, Sanded & Sealed (Time Lapse video 17). It took just 2 hours 15 minutes to sand this hardwood floor back to bare wood, removing all previous finish, marks, scratches etc. We Filled any holes around the floor. Then applied a Satin finish hard wax oil. The final coat was applied the following day.  This Floor was Sanded and Sealed in Matlock,  Derbyshire.

A 30 sqm of Maple 180mm wide strip flooring, Sanded & Sealed (Time Lapse video 16). It took just 4 hours 15 minutes to sand this hardwood floor back to bare wood, removing all previous finish, marks, scratches etc. We Filled any holes around the floor from grippers, damage etc. Then applied a barrier ‘Pre-Seal’ primer coat, followed by coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat is to be applied tomorrow.  This Floor was Sanded and Sealed in Bargate, Belper,  Derbyshire.

170 sqm Pine strip flooring Sanded & Stained with water based Antique pine colour. Then hand waxed with Osmo 3136 Birch Tint for a white colour effect (Time Lapse video 15).  This video is for the final top coat of Osmo hard wax oil, Matt finish being applied once dried.

170 sqm Pine strip flooring Sanded & Stained with water based Antique pine colour. Then hand waxed with Osmo 3136 Birch Tint for a white colour effect (Time Lapse video 14). It took 9 hours to wax all the 170 sqm included hand removed excess birch tint. The final top coat of Osmo hard wax oil, Matt finish is to be applied once dried.

A 35 sqm Oak Hardwood Strip Kitchen Floor Sand & Seal (Time Lapse Video 11). It took just 4 hours 10 minutes to sand this Engineered Oak floor back to bare wood, removing all previous finish, marks, scratches etc. Then applied a barrier ‘Pre-Seal’ primer coat, Unfortunately the battery died on the camera but then the 2nd coat was then applied. The final coat is to be applied tomorrow.

A 26 sqm Pine Softwood Strip Bathroom Sand, Stain & Oil (Time Lapse video 10). It took just 3 hours 35 minutes to sand this pine floor back to bare wood, removing all previous finish, marks, scratches etc. Then Oiled the floor with coat 1, an OMSO tint, Terra colour coating, The final coat is to be applied tomorrow.

A 24 sqm Pine Softwood Strip Bedroom Sand, Stain & Oil (Time Lapse video 9). It took just 4 hours 5 minutes to sand this pine floor back to bare wood, removing all previous finish, marks, scratches etc. Then Oiled the floor with coat 1, an OMSO tint, Terra colour coating, The final coat is to be applied tomorrow.

A 13 sqm Oak Hardwood Strip Hallway Sand, Stain & Seal (Time Lapse video 8). It took just 3 hours 15 minutes to sand this oak floor back to bare wood, removing all previous finish, marks, scratches etc. We Filled any holes around the floor from grippers, damage etc and seal with coat 1, A medium oak stain coating, Then coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat is to be applied tomorrow.

An Oak Hardwood Strip Sand & Seal (Time Lapse video 7). It took 3 hours 45 minutes to sand this oak floor back to bare wood, removing all previous finish, marks, scratches etc. We Filled any holes around the floor from grippers, damage etc and seal with coat 1, A pre-seal barrier primer coating, Then coat 2 a water based commercial grade polyurethane floor seal, Satin finish was applied. The final coat is to be applied tomorrow.

Cromford, Derbyshire job part 2, (Time Lapse video 6). A maple hardwood block Sand & Seal. This video is day 2, following sanding yesterday and allowing the customer to fill the floor themselves to their desecration. We final sanded the floor and applied coat 1, A pre-seal barrier primer coating, then coat 2 a water based commercial grade polyurethane floor seal was applied. The final coat to be applied tomorrow.

Pine Sand, Stain and Seal (Time Lapse Video 4). This Floor was Sanded and Stained in a Dark Oak finish in Borrowash, Derbyshire. It took 4 hours to sand the floor back to bare wood and apply the stain as seen in the video.

Tel: 01773 822 198    Mobile: 07971 166904    Emailinfo@floorcareservices.co.uk

(All Answer phone messages, Emails and Text messages will be replied to within 24 hours and Calls answered 7 days a week.)